Infusion Pumps in California

Safer Infusion Systems manufactures gravity-fed IV infusion systems and advanced medical supplies designed to enhance patient care and optimize medication administration safety. The company specializes in closed-system IV infusion solutions with proprietary features including the KVO AutoStart™ technology for automatic flushing and vein patency maintenance. Their product line emphasizes simplicity and safety in acute care environments, specifically addressing nurse workflow challenges such as short staffing, shift handoffs, and multi-fluid management complexity. Safer Infusion Systems' solutions incorporate dead-volume elimination, hazardous-free fully closed system design, and intuitive labeling to support compliance with the ten rights of medication administration (right patient, medication, dose, route, time/frequency, education, reason, refusal, response, and documentation). The company markets to hospital infusion departments and acute care facilities seeking to reduce setup time, improve labor efficiency, and minimize clinical errors. Products feature flow-selector-ready design and syringe/mini IV bag compatibility. While specific regulatory credentials are not detailed on the fetched site, the company's focus on patient safety and medication administration protocols suggests alignment with FDA and standard healthcare compliance requirements.

EMED Technologies is a global leader in subcutaneous infusion and drug delivery solutions founded in 1991 and headquartered in El Dorado Hills, California. The company specializes in patient-centric home infusion platforms designed for biologics and specialty pharmaceutical administration. EMED manufactures a comprehensive portfolio of subcutaneous infusion systems including the SCIg60 infuser, VersaPump mechanical pump, and VersaRate Plus flow controller, alongside complementary accessories such as OPTFlow needle sets, AccuSert needle inserters, and hypoallergenic dressings. The company provides end-to-end solutions spanning device development, design optimization, final assembly, labeling, and packaging to support pharmaceutical partners in commercializing innovative drug delivery solutions. EMED's mission centers on empowering patient independence and improving treatment adherence through ergonomic, safety-focused infusion technology. The company serves tens of thousands of patients globally and maintains partnerships with leading pharmaceutical manufacturers to optimize drug delivery platforms for at-home administration.

Medten USA Inc. is a B2B medical device parts and accessories distributor specializing in replacement cables, connectors, sensors, and consumable supplies for a broad range of clinical monitoring, anesthesia, respiratory, and surgical equipment. The company maintains an extensive inventory of aftermarket accessories compatible with equipment from major manufacturers including GE Healthcare, Philips, Masimo, Fisher & Paykel, Huntleigh, and others. Product categories include fetal monitoring cables and transducers, ECG and arrhythmia monitoring leadwires, anesthesia and respiratory system accessories (O2 sensors, flow sensors, humidifier components, ventilator adapters), patient monitoring cables (blood pressure, temperature, SpO2), tourniquet system components, electrosurgical unit (ESU) accessories, deep vein thrombosis (DVT) pump supplies, batteries and power supplies, endoscope system components, and miscellaneous interconnect cables. Medten serves hospitals, clinics, and medical equipment service organizations with replacement parts, repair supplies, and compatibility accessories. The company operates as a parts and accessories supplier rather than an OEM manufacturer, positioning itself as a source for cost-effective alternatives and hard-to-find legacy equipment components. Based on the extensive device compatibility database and catalog organization, Medten caters to facility biomedical departments, equipment service technicians, and procurement teams managing multi-vendor equipment portfolios.

Piccolo Medical designs and manufactures guidance systems for peripherally inserted central catheter (PICC) and central venous catheter (CVC) placement. The company's flagship products—PM2+™ System and ECGuide®—use intravascular electrocardiogram (ECG) technology combined with ionic dilution sensing to enable bedside confirmation of catheter tip positioning, eliminating the need for post-placement chest X-ray confirmation. The PM2+™ System features the Nav+™ stylet with machine learning-powered navigation feedback delivered via a mobile app; setup takes under 90 seconds and provides real-time guidance during catheter insertion. ECGuide® is cleared for use in adult, pediatric, and neonatal patients and has been shown to improve placement accuracy and reduce complications including thrombosis and malposition. The technology addresses a significant clinical and operational problem: approximately 50% of PICCs placed without guidance are malpositioned, requiring confirmatory imaging that adds cost, radiation exposure, and procedure time (average 78-minute wait for chest X-ray). Piccolo Medical is FDA 510(k) cleared and has received funding from the National Institute on Aging (NIA) and other federal agencies. The company serves hospitals and healthcare systems focused on improving catheter placement safety and reducing procedural delays.

Jiangsu Conod Medical Devices Co., Ltd. is a Chinese medical device manufacturer and supplier with approximately 20 years of export experience serving over 50 countries across the Americas, European Union, Japan, and developing markets in Asia, Africa, and Latin America. The company manufactures and distributes a broad portfolio of single-use medical consumables and devices across eight primary product categories: urology (catheters, drainage bags, catheterization trays, leg bags, urine meters), personal protective equipment (medical masks, surgical masks, face shields, isolation gowns, examination gloves), wound drainage systems (suction accessories, drainage devices, sputum suction kits), anesthesia and breathing supplies (anesthetic masks, aerosol trays), enteral feeding systems (feeding sets, feeding pumps), household emergency kits, nonwoven fabric materials, and specialty products (enema systems, fecal management collectors). The company operates vertically integrated capabilities including precision mold design and development, in-house injection molding (27 molding machines), third-party sterilization services (ETO sterilization with ISO 11135-2014 and ISO 13485-2016 certifications, FDA and Japanese FMA registration), and independent testing and detection center services. Conod holds Chinese medical device registration certificates and serves domestic and international hospital systems, clinical facilities, and distribution partners. The company emphasizes quality control, advanced manufacturing equipment, and customized product solutions aligned with international regulatory standards.

HAI Solutions Inc is a medical device company focused on preventing healthcare-associated infections (HAI) through innovative vascular access and intravenous care solutions. The company develops ultraviolet light-based microbial reduction devices and anesthesia delivery systems targeting contamination in operating rooms, emergency departments, and intensive care units. HAI Solutions' primary platform addresses Hospital Onset Bacteremia (HOB) and microbial contamination (MC) in needleless IV connectors and vascular access lines. The QIKcap System™ is an FDA De Novo-cleared ultraviolet (UVC) light-based microbial reduction device designed for needleless IV connectors—marketed as the first and only FDA-granted solution of its kind. The Multiport Delivery Device™ is a novel anesthesia induction system currently in development and not yet FDA-cleared. HAI Solutions addresses a significant clinical need: over 300 million IV lines are placed annually in the US, with 1 in 31 patients acquiring catheter-related bloodstream infections, costing $15,000–$30,000 per incident. The company serves peripheral, PICC, central vascular access, and dialysis line applications across the healthcare continuum. HAI Solutions holds ISO 13485 certification for medical device quality management and has received patent allowances from the US Patent and Trademark Office for intravenous device technology. The company has won recognition from industry organizations including the AANA (American Association of Nurse Anesthetists) Rm8 iNov8 Pitch Competition and CONNECT SD's Cool Company 2022 award.

Tenacore LLC is a medical device service, parts, and equipment company specializing in patient monitoring systems, fetal monitoring, and related clinical equipment. Operating from Costa Mesa, California, the company provides comprehensive solutions including equipment repair and maintenance services, rental of hospital-grade medical devices, refurbished and OEM parts inventory, and T-Certified (technician-certified) equipment. Primary product lines include cables and sensors for SpO2, ECG, and non-invasive blood pressure monitoring compatible with major manufacturers (GE, Philips, Mindray, Nihon Kohden, Nellcor, Masimo); fetal transducers; oxygen blenders; suction regulators; and modular components (M3001, M3015, 867041 modules). The company also offers specialized services such as in-hospital preventative maintenance programs (T.Care) for oxygen blenders and infusion pumps, equipment rental for peak demand periods, and expedited repair services with fast turnaround times. Tenacore recently joined Prescott's Med, expanding service and rental capacity while maintaining continuity of operations. The company serves hospitals, healthcare facilities, and clinical departments requiring short-term equipment solutions, replacement parts, and maintenance support. Products are sold new, refurbished, or as aftermarket alternatives, with all rental and service equipment T-Certified for quality assurance. The company engages in training initiatives for healthcare technical management professionals and participates in industry trade shows.

Pryor Products manufactures Class I medical device mobility solutions, including IV stands, rolling carts, mounting clamps, and related accessories. Founded in 1972 and based in Oceanside, California, the company specializes in American-made, customizable medical device mobility products designed for hospital and clinical environments. The product line includes the Safety Series IV stands (models 135G, 176G, 178G, 810G, 900G, 910G), traditional models (811 Hitch N Pal, 900), Speed Clamp mounting solutions, medical device carts optimized for OEM partners, computer carts, and mounting accessories. All manufacturing is conducted domestically using U.S.-sourced materials and manual craftsmanship, with products undergoing rigorous quality inspections throughout production. Pryor serves healthcare facilities requiring safe, reliable equipment for IV transport, medical device deployment, and patient mobility support. The company offers OEM manufacturing and design customization services for partners requiring specialized mobility solutions. Products are built to withstand demanding clinical conditions and are positioned as premium, safety-focused alternatives rather than cost-minimized offerings.