Top vendors for Electrotherapy Devices (TENS, EMS), compared
Six vendors in the MedSource directory under physical therapy electrotherapy — two make dedicated EMS devices, one is a major broad-line rehab supplier, and three use adjacent (non-traditional electrical) technologies worth understanding before you buy.
Top vendors for Electrotherapy Devices (TENS, EMS), compared
Six vendors in the MedSource directory under physical therapy electrotherapy — two make dedicated EMS devices, one is a major broad-line rehab supplier, and three use adjacent (non-traditional electrical) technologies worth understanding before you buy.
TL;DR
Not every vendor in this segment actually makes a TENS or EMS device. Knowing that upfront saves time.
DynaPulse Medical LLC and TrumedX LLC are the two pure-play EMS manufacturers here. DynaPulse's VEINOPLUS® targets venous and vascular conditions specifically; TrumedX bundles EMS with cold compression and DVT prevention gear for post-op recovery. Performance Health, founded in 1918, is North America's largest rehab supplier — it doesn't manufacture EMS devices but distributes a wide catalog including TENS/EMS electrodes and capital equipment, making it relevant for departments that want one vendor relationship for multiple PT supply categories.
The remaining three operate outside traditional electrotherapy. FluxWear, Inc. delivers pulsed electromagnetic fields (PEMF) through a wearable device — a different regulatory and clinical category from EMS, relevant for neuropathy and chronic pain clinics. Medella Health Ltd makes Flowpresso®, a Class II prescription device using pneumatic compression and heat — no electrical stimulation involved. Regenerative Technologies Corp (Juvent) delivers mechanical micro-impact vibration for bone health and balance — also not electrotherapy by any technical definition.
At a glance
| Vendor | Technology | Primary indication | Care setting | Founded |
|---|---|---|---|---|
| Regenerative Technologies Corp | Micro-impact vibration | Bone health, balance, mobility | Home | 2011 |
| Performance Health | Multi-product supplier (TENS/EMS included) | Broad rehab and recovery | Clinical + home | 1918 |
| Medella Health Ltd | Cyclic pneumatic compression + thermotherapy | Lymphatic care, ANS regulation | Clinical | 2020 |
| DynaPulse Medical LLC | EMS — electrical muscle stimulation | Venous insufficiency, vascular conditions, lymphedema | Clinical + home | 2019 |
| FluxWear, Inc. | PEMF — pulsed electromagnetic field | Chronic pain, CIPN, anxiety, focus | Clinical + home | 2021 |
| TrumedX LLC | EMS + cold compression + DVT prevention | Post-op and injury recovery | Clinical + home | — |
Publicly verifiable pricing was not available for any vendor in this comparison at time of writing. Request quotes directly.
How they compare
EMS device specificity
DynaPulse Medical LLC offers the most tightly defined EMS product here. Its VEINOPLUS® device uses what the company markets as Second Heart Technology™ — electrical stimulation of the calf muscle pump to improve venous return and arterial inflow. Indicated conditions include venous insufficiency, varicose veins with ulceration, lymphedema, hematoma absorption, and circulatory complications from diabetes and arteriosclerosis. The device is handheld and ergonomic, designed for both clinical prescribing and patient home use.
TrumedX LLC also manufactures EMS devices, but positions them as one component of a broader post-operative recovery system alongside cold compression therapy, orthopedic bracing, and DVT prevention devices. If your ASC or orthopedic program buys post-surgical recovery equipment as a bundled category, TrumedX's multi-product lineup could reduce the number of vendor contracts you manage. If your need is EMS alone for a vascular or wound care program, DynaPulse's single-focus product may be easier to evaluate and validate clinically.
Broad supply vs. device manufacturing
Performance Health sits in a different lane entirely. It's a distributor with over 100 years in the market, not a device OEM. Its e-commerce platform spans TENS/EMS electrodes, THERABAND resistance products, hot/cold therapy, mobility aids, and capital equipment. For a hospital PT department managing dozens of product categories, that breadth has real procurement value — consolidated purchasing, one account relationship, and an established supply chain. The tradeoff: you won't get deep engineering or clinical support for a specific EMS device the way you would from DynaPulse or TrumedX.
Technologies that sit adjacent to TENS/EMS
Three vendors here use mechanisms that fall outside traditional electrotherapy, and buyers should understand the distinction before they land in the wrong product evaluation.
FluxWear, Inc. delivers low-level pulsed magnetic fields through microcoil emitters embedded in a wearable, hat-like form factor. Sessions run 25 minutes and target chemotherapy-induced peripheral neuropathy (CIPN), chronic pain, and anxiety management. PEMF is a legitimate therapeutic category, but it is not EMS or TENS — the underlying physics, FDA regulatory pathway, and reimbursement codes are different. Verify clearance status directly via the FDA 510(k) database and confirm payer coverage before procuring for a clinical program.
Medella Health Ltd makes the Flowpresso®, a Class II prescription device with four independently adjustable pneumatic compression chambers, customizable heat, and a touchscreen interface. Standard sessions run 40 minutes. The target market is physical therapists, chiropractors, and lymphatic-focused practitioners — but the mechanism is compression and heat, not electrical stimulation. It belongs in a lymphedema or integrative health equipment evaluation, not a TENS/EMS comparison.
Regenerative Technologies Corp (Juvent) delivers calibrated micro-impact vibration tuned to the user's body resonance frequency. The company explicitly distinguishes this from whole-body vibration platforms. Applications are claimed for osteoporosis, balance, and recovery — and the device is positioned for home use. There is no electrical stimulation component. It should not be evaluated on the same criteria as EMS devices.
How to choose
Map your use case to the right product category first — then evaluate vendors within it.
- Post-operative muscle restoration in an ASC or orthopedic rehab setting: Look at TrumedX LLC — the EMS device integrates with cold compression and DVT prevention in a single recovery-focused product line.
- Vascular or wound care program needing EMS for venous insufficiency or lymphedema: DynaPulse Medical LLC and its VEINOPLUS® device is the most specifically indicated option in this list for those conditions.
- Hospital or large outpatient PT department buying TENS/EMS electrodes, accessories, and capital equipment across multiple categories: Performance Health offers the broadest catalog under one distributor relationship.
- Pain management or oncology rehab clinic evaluating PEMF for neuropathy or chronic pain: FluxWear, Inc. is the only vendor here using this technology — confirm FDA clearance status and reimbursement eligibility independently before procurement.
Sources
- 4 Best Vibration Plates of 2026, Tested by Experts - Consumer Reports
- Characterisation and evaluation of the regenerative capacity of Stro-4+ enriched bone marrow mesenchymal stromal cells using bovine extracellular matrix hydrogel and a novel biocompatible melt electro-written medical-grade polycaprolactone scaffold - ScienceDirect
- Toxicological Profile for n-Hexane
- Cardiology and Radiology Imaging Guidelines Effective May 4, 2026 - UnitedHealthcare Community Plans
Browse vendors in
Vendors discussed
MedSource publishes neutral guidance. We do not accept payment from vendors to influence the content of articles. AI-generated articles are reviewed for factual accuracy but cited sources should be the primary reference for procurement decisions.