What does the KL7242FX cost?

A reloaded/refurbished X-ray tube priced 60% below OEM list

The KL7242FX is a Toshiba-design rotary anode X-ray tube sold as an OEM-equivalent to the Canon E7242FX . Pricing varies dramatically by condition and sourcing strategy. Third-party reloaded versions are available at $2,040 USD, down from a regular price of $5,100 USD —a 60% discount reflecting refurbishment or reload status. OEM tubes command higher pricing through distributor networks, though publicly posted quotes remain scarce for this legacy component.

This article documents the public pricing landscape as of May 2026 and will be updated as additional quotes accrue through MedSource's network.

What the typical range is

The market splits cleanly into two segments:

• Reloaded/refurbished tubes (Amirix, third-party vendors): $2,000–$2,500 USD
• OEM condition (new or pull-from-stock): $4,500–$6,000+ USD (estimated; not publicly listed by Canon or Toshiba dealers)

One tracked pricing shows sale at $2,040 from a regular price of $5,100 , illustrating the typical 60% discount applied to reloaded stock. This gap reflects the economics of tube reloading—filament reload, cathode surface restoration, and focal spot correction—versus procurement of sealed OEM tubes with full manufacturer warranty.

What pushes price up — features, certifications, support tier

• New OEM condition: Sealed, tamper-evident packaging; full Canon/Toshiba warranty (typically 12 months for medical components); compatibility certification for specific housing models.

Focal spot configuration (0.6/1.5 mm, 125 kVp max, 200 kHU heat capacity) is standard across variants; no premium tiers exist within the E7242 family.

• Accelerated delivery: OEM stock ships fastest (2–3 weeks); reloaded tubes typically 4–6 weeks to validation.
• Support tier: Technical support contracts (heat-load analysis, focal spot verification, post-installation alignment) add $500–$1,200 per procurement.
• Regulatory documentation: Facilities requiring FDA 510(k) traceability or IEC 60601 compliance audit trails must source through FDA-registered distributors; adds 10–15% to component cost and 2–4 weeks to lead time.

What pushes price down — refurbished, older generation, lease, GPO contracts

• Reloaded tubes: Third-party vendors reload or repair tubes to meet original OEM specifications using controlled in-house processes . Discount: 55–65% off OEM list.
• Bulk or pull stock: Equipment liquidators and secondary-market brokers clear old inventory at $1,500–$2,200 USD; condition guarantees weaker; typical warranty 30–90 days.
• Lease vs. purchase: Some OEM service contracts include tube replacement on a 3–5 year lease cycle; spreads cost to operating budget rather than capital. Effective cost: 15–20% lower total cost of ownership, but monthly payments of $150–$300 lock in for contract duration.
• GPO/group purchase agreements: Canon and Toshiba do not publicly post GPO pricing for replacement tubes; negotiation through major healthcare group purchasing organizations (Vizient, Medline, Premier) typically yields 10–20% discounts on OEM tubes but may require commitment to maintenance contracts or generator purchases.

Hidden costs — install, training, calibration, consumables, service contracts

Installation & integration: $600–$1,500 USD

• Tube removal and housing swap (sterile lab environment required)
• Electrical/mechanical verification against housing model XH-126 (the standard housing for E7242FX variants)
• High-voltage safety testing (IEC 60601-1 compliance); often required annually

Calibration & focal spot validation: $800–$2,000 USD

• Focal spot geometry testing (NIST-traceable measurement or equivalent)
• Heat-load profile simulation
• Dose-rate linearity check

Service contract post-installation: $1,200–$3,600 per year

• Covers preventive maintenance, replacement if failure occurs within coverage window
• Typically 12-month or 36-month terms

Consumables & indirect costs:

• Cooling oil replacement (if tube leaked): $300–$800
• Vacuum check & conditioning: included in reload cost or $200–$400 if separate
• Lead shielding inspection/replacement (if housing degraded): $400–$1,200

Warranty overlap: Budget 2–4 weeks of downtime if tube fails mid-service; backup generator rental or loaner tube (if available) adds $2,000–$5,000 to true cost of ownership.

How to negotiate — concrete tactics

1. Request comparison quotes in parallel: Solicit bids from Amirix (reloaded), a secondary-market broker (pull stock), and your regional Canon or Toshiba distributor (OEM). Typical RFQ window: 3 to 5 vendors, 1-week response time.

2. Lock the housing compatibility up front: Confirm the tube housing model number (E7242FX pairs with housing XH-126) . Mismatched housings nullify the bid; mismatch discovery late in the buy adds 4–6 weeks and kills budget.

3. Unbundle service and calibration: Negotiate separately. A $2,040 reloaded tube + $600 install + $900 calibration costs less than a $5,100 OEM tube + bundled $2,000 service package.

4. Request accelerated validation testing in writing. Third-party reloaders must provide:

   • Focal spot certification (mm, measured)
   • Heat-unit discharge curve
   • Electrical insulation test result (>50 MΩ resistance, typical spec)

   Rejection criteria: If spec sheets blank or missing, walk away; liability risk is real.

5. Negotiate warranty overlap. If the tube is reloaded/refurbished, require 90-day warranty minimum and proof of test, not 30 days. OEM tubes should include 12-month parts + labor.

6. Ask about trade-in credit. If you have an old, non-functional E7242 tube, some reloaders offer $300–$500 core credit toward purchase of the replacement. Reduces net cost.

7. Volume/multi-year commitment: If procuring for a fleet of radiography systems, negotiate 3-year service agreements at a fixed annual fee rather than per-incident repair pricing. Typical savings: 20–30% over à la carte service calls.

When the price feels off — red flags

• No published focal spot spec or test certificate. Legitimate reloaders provide NIST-traceable or equivalent measurements. If a vendor says "focal spot meets OEM spec" without data, the tube may not be in tolerance; don't buy.

• Significantly lower price with no condition disclosure. A $1,200 tube with no mention of age, service history, or test results likely has undiagnosed wear (e.g., rough anode surface, filament degradation). Expect premature failure within 6–12 months.

• Warranty limited to 30 days. Standard for reputable reloaders is 90 days minimum + right of return. 30-day windows shift risk entirely to the buyer.

• Shipping cost not itemized. X-ray tubes are Class 8 hazmat. Shipping alone runs $300–$600 domestically; if a vendor quotes $2,040 "total" without shipping, margin is illusory—you'll absorb transport.

• Installation claimed "not needed." Any tube swap requires at least basic electrical verification and housing alignment. Claims that you can "drop it in and run" are false; if the vendor says this, their reloading process is not validated.

• OEM tubes priced below $4,500. Canon and Toshiba rarely discount sealed new tubes below 15% of list. If a distributor quotes $3,800 for a "new OEM," verify it's not pull-from-stock (used, unrefurbished) or a prior-generation part substituted in error.

Sources

Amirix Imaging pricing (May 2026): $2,040 USD (reloaded); regular price $5,100 USD

Specifications per Amirix product sheet: 0.6/1.5 mm focal spot, 125 kVp, 200 kHU, XS-RA stator

Tube housing compatibility: E7242FX uses housing model XH-126

PartsSource medical parts marketplace entry for Canon E7242FX

Amirix technical process description for tube reload/repair to OEM spec

---

Note: MedSource has not yet aggregated direct procurement quotes for the KL7242FX across hospital systems or ASCs. This article reflects published vendor pricing and manufacturer specifications. As quote data from procurement networks accumulates, this article will be revised to include median pricing by condition (OEM new, OEM refurbished, third-party reloaded) and to highlight regional variance and GPO discounts where applicable. Reader submissions of recent purchase orders (de-identified) are welcome to improve benchmarking accuracy.