Sterilization Equipment in Massachusetts

Diamond Diagnostics Inc. is a specialized clinical laboratory instrumentation and consumables supplier based in Holliston, Massachusetts, founded in 1996. The company manufactures, remanufactures, and supplies new and refurbished chemistry analyzers, electrolyte analyzers, immunoassay systems, blood gas analyzers, coagulation analyzers, hematology analyzers, and molecular analyzers. With approximately 80 employees and ~$19M annual revenue, Diamond offers over 500 consumable products including reagents, quality controls, and electrodes. The company's proprietary Down-To-Frame® refurbishment process restores equipment to like-new condition. Most products hold FDA clearance and CE approval. Diamond provides comprehensive field service, depot service, preventive maintenance, remote support, control assay, and refurbishment services to clinical laboratories and hospitals globally. ISO 9001:2015 and ISO 13485:2016 certified, the company also offers OEM and contract manufacturing for third-party organizations.

Boston Cell Standards Inc develops calibration and quality control solutions for immunohistochemistry (IHC) testing, a critical diagnostic method in cancer diagnosis and treatment stratification. The company manufactures IHCalibrators® and IHControls®—quantitative reference standards and quality control products designed to standardize and improve the accuracy and consistency of IHC assays across laboratory systems and sites. BCS products are used in clinical pathology laboratories for assay validation, lot-to-lot and instrument-to-instrument alignment, troubleshooting, and proficiency testing, as well as in pharmaceutical and life sciences settings for drug development and clinical trial consistency. The company received FDA clearance for its IHControl® panel—the first FDA-cleared quantitative control for anatomic pathology in breast cancer—and collaborates with the National Institute of Standards and Technology (NIST) to establish measurement traceability and reference standards for IHC. Boston Cell Standards is ISO 13485 certified and has received over $9 million in funding from the National Cancer Institute (NIH) spanning more than 20 years. The company has established the Consortium for Analytic Standardization in Immunohistochemistry (CASI) to advance IHC quality standards. Research published in peer-reviewed journals including Lancet: eBioMedicine, Laboratory Investigation, and American Journal of Surgical Pathology validates the effectiveness of BCS technology in improving analytical sensitivity and reducing inter-lab variability in breast cancer HER2 testing and other oncologic diagnostics.

Tegra Medical is a global contract manufacturer specializing in end-to-end production of medical devices. Headquartered in Franklin, Massachusetts, with manufacturing facilities across the United States, Costa Rica, Switzerland, and Asia, the company employs over 1,000 people. Tegra Medical delivers comprehensive manufacturing solutions including design, prototyping, precision production, assembly, packaging, and sterilization for complex metal and plastic components. The company serves multiple therapeutic areas including oncology, orthopedics, cardiology, minimally invasive surgery, ophthalmic, women's health, drug delivery, and robotic-assisted surgery applications. Advanced manufacturing capabilities include Swiss machining, multi-axis milling, injection molding, wire grinding, and precision finishing. Tegra Medical maintains ISO 13485 certification and FDA registration, supported by rigorous quality management systems. The company also operates Quick Wire & Tubing, an e-commerce platform offering in-stock and custom wire, tubing, and secondary processing services for medical device development and prototyping.

Riverside Medical Packaging Co. Ltd. is a UK-based contract packaging and fulfillment specialist serving the healthcare, medical device, veterinary, nutrition, and supplement sectors. The company provides medical packaging consumables (peel pouches, sachets, bags, medical blisters, lids), packaging equipment (ultrasonic cleaning, contract packing, and sealing systems), and comprehensive contract packaging services. Core capabilities include twelve ISO-certified cleanroom cells for cleaning, molding, assembly, and packing of medical devices. Services span blister packing, pouch packaging, product assembly, and medical device packing. Additionally, the company offers custom fulfillment solutions encompassing project management of packaging design, cleaning verification, packaging validation, stability testing, and sterilization validation. Riverside was acquired by Sterimed in June 2024, a global leader in medical packaging. The company holds ISO 13485 (medical device quality management) and ISO 14001 (environmental management) certifications. Manufacturing capabilities include custom packaging machine design and production, demonstrated by development of face shield manufacturing equipment during COVID-19. The company operates a 16,000 sq ft custom-built facility with expansion capacity, serving complex medical device manufacturers and brand developers requiring regulatory-compliant packaging solutions.

Ranfac Corp. is an ISO 13485:2016-certified Contract Development and Manufacturing Organization (CDMO), Original Equipment Manufacturer (OEM), and Contract Manufacturing Organization (CMO) specializing in custom Class I and Class II single-use hypodermic-based medical devices. Founded in 1888 and based in Avon, Massachusetts, Ranfac operates a vertically integrated 40,000 sq ft facility that manages all production stages in-house: metal machining (12 specialized processes including CNC, laser welding, electropolishing), polymer injection and insert molding (Class 8 cleanroom), cleaning and passivation, cleanroom assembly (Class 7 ISO), and EO sterilization via exclusive STERIS partnership. The company serves minimally invasive surgery access devices, biopsy and aspiration systems, orthobiologics delivery cannulas, interventional radiology components, hematology devices, and general surgery instruments. Ranfac supports low minimum order quantities and scales from prototype to 500K+ units annually. MDSAP, EU MDR, and FDA registered, enabling simultaneous access to seven export markets.

UFP MedTech is a full-service medical device contract manufacturer and packaging solutions provider specializing in single-use devices, sterile packaging, and protective components for medical applications. The company designs, develops, and manufactures thermoplastic and foam-based medical device components, sterile barrier packaging, protective housings, surgical draping systems, patient transfer and support surfaces, and fluid control pouches. Primary markets include infection control, protective packaging, wound care, diagnostics, wearables, interventional and surgical devices, therapeutics, and surfaces and support equipment. UFP MedTech operates FDA-registered cleanroom manufacturing facilities across multiple US locations (Chicopee MA, Grand Rapids MI, Newburyport MA, Georgetown MA) and internationally (Costa Rica, Dominican Republic, Mexico, Ireland, Puerto Rico, Singapore). The company manufactures Class I, II, and III medical devices and holds ISO 13485 certification and FDA registration. Core manufacturing capabilities include precision thermoplastic injection molding, compression molding, thermoforming and heat sealing, cut-and-sew fabrication, rapid prototyping and tooling, and supply chain management. Product lines include FlexShield® TPU pouches for orthopedic implants and surgical instruments, BioShell® bioprocess bag containers, foam and thermoplastic components for implantable devices, catheter and guidewire packaging, and customized medical device packaging solutions. The company was founded in 1963 as United Packaging Corporation and has grown through strategic acquisitions of specialized manufacturers including Dielectrics (2018), Contech Medical (2021), DAS Medical (2021), Advant Medical (2022), AJR Enterprises (2024), Welch Fluorocarbon (2024), Marble Medical (2024), AQF Medical (2024), and most recently UNIPEC and TPI (2025).

Plastic Sterilizing Tray Corp. (PST Corp.) manufactures plastic sterilization trays and related accessories for surgical and medical instrumentation. The company specializes in reusable plastic trays designed for sterilization processes in healthcare settings. Product lines include standard sterilization trays, silicone accessories, sterility assurance mats, and scope trays—indicating applications across general surgical instrument organization, endoscopy equipment sterilization, and infection control workflows. The trays are designed to organize, protect, and facilitate sterilization of medical instruments and devices. PST Corp. serves hospital surgical centers, operating rooms, and other healthcare facilities requiring compliant sterilization solutions. Founded in 2002, the company maintains a focus on manufacturing plastic components for the sterilization and instrument management segment of healthcare operations.

Cunningham Woodland Inc. is a New England-based medical distributor and repair specialist serving hospitals and surgical facilities for over 45 years. The company specializes in surgical instruments, sterilization equipment, and comprehensive repair services for operating rooms and sterile processing departments. As an ISO 13485:2016-certified facility, CWI provides surgical instrument repair with technicians averaging over 10 years of experience, mobile repair labs, in-hospital repair shops, and sterilizer cleaning services. The company also distributes single-use surgical consumables and offers repair tracking technology to streamline customer operations. Operating as a member of the Alliance of Surgical Distributors (ASD), CWI combines regional expertise with specialized clinical support across New England and beyond.

Super Brush LLC is a USA-based manufacturer of precision foam applicators and swabs headquartered in Springfield, MA. With over 65 years of manufacturing experience in Hampden County, the company specializes in contract manufacturing of sterile and non-sterile foam swabs for medical, diagnostic, industrial, and specialized applications. Product lines include sterile sample collection swabs for clinical and diagnostic use, non-sterile COVID swabs, pre-saturated foam applicators, dermatology applicators, infection prevention swabs, medical equipment cleaning swabs, surgical instrument cleaning swabs, forensic and DNA collection swabs, food safety applicators, cleaning verification swabs, and industrial foam swabs for aerospace, automotive, electronics, and analytical applications. Super Brush is ISO 13485-certified and FDA-registered, meeting rigorous quality standards required by medical device manufacturers and diagnostic laboratories. The company manufactures, packages, and ships all products from its facility in Springfield, MA. Services include custom design and prototyping, large-scale production runs, and international distribution options. Products are sold under the Super Brush and Swab-its brand names and are available through direct sales, retail partnerships (Amazon, Walmart, major retailers), and B2B procurement channels.

TERRAN LLC is an orthopaedic medical device manufacturer specializing in implants, surgical instruments, and sterilization cases. The company operates a worldwide network of manufacturing facilities focused on orthopaedic solutions. Product lines include arthroscopy instruments, trauma instruments, maxillofacial devices, neurosurgical instruments (Kerrison rongeurs, lamina spreaders, flexible osteotome sets, mallets), screw drivers and bits, drill bits, fixation pins, taps, and sterilization cases. TERRAN serves orthopaedic surgeons, trauma centers, and surgical facilities with a full line of devices designed to streamline procurement and support customer growth. The company positions itself as a single-source provider to reduce sourcing complexity for hospital and surgical center buyers.

Jiujiang Huada Medical Dressing Co., Ltd., established in 2003, is a medical consumables manufacturer based in Gongqing city, Jiujiang, Jiangxi Province, China. The company employs 260 personnel and specializes in the design, manufacture, and distribution of medical-grade gauze products and sterilization packaging materials. Core product lines include non-sterile and sterile gauze swabs, 100% cotton gauze rolls (4-ply), gauze bandages, laparotomy sponges (lap sponges) with X-ray detectable chips, and sterilization pouches and reels in various configurations. All gauze products are manufactured from bleached cotton and are designed for wound cleaning, coverage, and secretion absorption in medical institutions and care settings. Sterilization pouches and reel rolls are fabricated from medical-grade paper and multilayer film materials suitable for autoclaving. The company serves global markets and participates in major medical trade exhibitions including CMEF Shanghai and Hospitalar. Manufacturing capabilities include OEM production and customization. No specific regulatory certifications (FDA 510(k), ISO 13485, or CE marking) are mentioned on the website.